| 9E298 Dell Powervault 220S
SCSI Storage Array AMP01 Dell PowerVault 220S systems are
reliable, flexible, external SCSI expansion enclosures designed to
support multiple Dell storage environments and RAID configurations.
Each system offers maximized drive-spindle count, hot-plug hard
drives, optional redundant power, redundant cooling, rackmount
capability, systems management features, and a modular design for
easy upgrades. Most major components, including hard drives and
power supply/cooling modules are hot-pluggable and can be removed
and replaced easily. The enclosure management module (EMM),
split-bus module, and SCSI terminator card are "warm-pluggable."
This means they can be removed or inserted while the power is on,
but all I/O activity has ceased.
Uses Dell 9D988 trays / caddies.
Specifications
|
Drives |
| SCSI hard drives |
support for up to
fourteen 1-inch-by-3.5-inch LVD Ultra 160 and Ultra 320 hot-plug
hard drives, at speeds of 10K or 15K rpm. |
|
Bus |
| Configurations |
support for any of the
following:
- one 14-device SCSI bus (joined-bus mode)
- one clustered 13-device SCSI bus (cluster mode)
- two independent 7-device SCSI buses (split-bus mode)
|
|
Back-Panel Connectors |
| SCSI connector |
68-pin shielded P-type
SCSI for connection to host |
|
Backplane Board Connectors |
| Hard drives |
fourteen 80-pin SCA-2
connectors |
| Power supply/cooling
module |
2 high-current
connectors |
| Enclosure management
modules (EMM) |
210-pin connector |
| Split-bus module |
180-pin connector |
|
Enclosure Modules |
| EMM |
2 warm-pluggable
modules |
| Split-bus module |
1 warm-pluggable
module with an external slide switch to change between
split-bus, joined-bus, and cluster modes |
| SCSI terminator card |
1 warm-pluggable
module to the terminate SCSI bus in nonredundant EMM
configurations |
|
LED Indicators |
| Front panel |
5 LED status
indicators for power, fault, split bus, cluster mode, and
over-temperature |
| Hard-drive carrier |
1 single-color
activity LED and 1 two-color LED status indicator per drive |
| EMM |
3 LED status
indicators for power, fault, and active status |
| Split-bus module |
1 LED indicator for
power |
| Power supply and
cooling module |
3 LED status
indicators for power supply status, power supply fault, and AC
status and 2 for cooling module fault |
|
Power Supplies |
| Wattage |
600 W |
| Heat dissipation |
200 W |
| Voltage |
100-240 V rated
(actual 85-264 V) |
| Frequency |
50-60 Hz |
| Amperage |
9.4 A at 100 V, 4.6 A
at 200 V |
|
Physical |
| Height |
13.26 cm (5.22 inches) |
| Width |
44.58 cm (17.55
inches) |
| Depth |
50.8 cm (20 inches) |
| Weight
PowerVault 220S
PowerVault 221S
|
32.4 kg (71.5 lb.)
maximum redundant configuration with all hard drives installed
42.2 kg (93.0 lb.) maximum redundant configuration with all
hard drives installed |
|
Environmental |
| Temperature:
Operating
Storage |
10° to 35°C (50°
to 95°F)
-40° to 65°C (-40° to 149°F) |
| Relative humidity
Operating
Storage |
8% to 80% (noncondensing)
8% to 95% (noncondensing) |
| Altitude
Operating |
-16 to 3048 m (-50
to 10,000 ft) |
| BTU per hour |
2750 |
|
Available Hard-Drive Power (Per Slot) |
| Supported hard-drive
power consumption |
up to 1.3 A at +12V
up to 1.5 A at +5V |
Power supply P/N's: 9X809, C8186
"Warm-Plug" cards installed in the back: Y0317, J2038
*PLEASE NOTE: This sale does not include ANY hard drives or drive
trays. Drives and trays may be available, but are not included in
the purchase price.
|