Intel Pro/Wireless LAN
Enterprise Access Point (WEAP2011BAK)
This item is new with open box.
Standards Conformance Wi-Fi* IEEE 802.11b High Rate,
802.3u/100BASE-T, SNMP v2, 802.1H, 802.1d Spanning Tree, 802.11d
(International Roaming) Local Configuration Direct console port
(serial EIA-232 DB-9 male) Remote Configuration HTTP (via Web
browser), Telnet, SNMP, FTP, and Intel feature to do bulk
configuration to many Access Points Automatic Configuration BOOTP,
DHCP and Automatic Channel Selection Management Features
Client Access Control via MAC address
Embedded HTTP Server
SNMP traps
Multilevel passwords Diagnostic Capabilities
Event logging, data packet tracing, SNMP alarm generation,
operating statistics
Protocol and bandwidth filters
Site Survey utility with signal strength logging Roaming
Support IEEE 802.11b High Rate compliant with Intel-enhanced
roaming features
Performance
Range at 1 Mbps (typical):
- 1500ft (460m) open environment
- 300ft (90m) office environment
Range at 11 Mbps (typical)
- 400ft (120m) open environment
- 100ft (30m) office environment
- Maximum Clients: 256
- Antenna: Two 1dBi dipole antennas with diversity support,
also supports specialty antennas
Receive sensitivity
- -90dBm @ 1 Mbps
- -88dBm @ 2 Mbps
- -87dBm @ 5.5 Mbps
- -83dBm @ 11 Mbps
Performance Enhancements
- Proxy ARP
- Short preamble support
- QoS Voice and Data Prioritization
- 802.1H encapsulation
Security
- 64-bit or 128-bit encryption
- Access control list
- MD5 member authentication (Mobile IP)
|