|
Adaptec/Dell PERC II RAID Controller Card with 128MB Cache (AAC-364)
The AAC-364 is Adaptec's 64-bit PCI-to-Ultra2
SCSI RAID Array Controller. It is the first RAID solution that
enables customers to take full advantage of the industry's hottest
64-bit server systems. With its 64-bit bandwidth, on-board
processor, and on-line management features, the AAC-364 delivers the
I/O performance, scalability and availability that today's
information systems demand.
- High-performance 64-bit PCI RAID 932-bit
compatible) with on-board StrongARM 233 MHz microprocessor
- Sustained data rates in excess of 200
Mbytes/sec
- 4 Ultra2 SCSI channels with 2 internal
and 4 external connectors
- Connect up to 60 drives per controller an
dup to 480 devices per system
- Battery-backed cache memory module
supports up to 128 MB of industry standard ECC memory
- Adaptec array management software for
simplified management of multiple controllers from any location
- On-line "no-downtime" storage capacity
expansion and reconfiguration
|
Computer Bus |
64-bit PCI local bus |
|
On-board Processor |
StrongARM RISC microprocessor (233
MHz) |
|
Interface Protocol |
Bus Master DMA |
|
Cache Memory |
Up to 128 Mbyet ECC-protected,
battery, backed DRAM |
|
Host Burst Date Transfer Rate |
Up to 266 Mbyte/sec burst rate
(64-bit) |
|
SCSI Synchronous Data Rate |
Up to 80 Mbyte/sec per channel |
|
Device Protocol |
SCSI Ultra2, Ultra, Fast and Wide |
|
RAID Support |
RAID 0, 1, 0/1, and 5 |
|
Array Support |
Up to 64 arrays per controller,
with a maximum of 32 partitions per array |
|
Advanced Storage Management
Features |
Easy-to-use GUI and configuration
wixards |
|
|
Command line interpreter for
automated scripts |
|
|
Single-step array creation |
|
|
On-line capacity expansion |
|
|
On-line RAID level migration |
|
|
Warm-Swap, Hot-Swap and Hot-Spare |
|
|
Drive error tracking (S.M.A.R.T) |
|
|
Enclosure environment tracking (SAF-TE) |
|
|
SNMP Support |
|
|
E-mail and pager event
notification |
|
PCI Bus |
64-bit, 33 MHz (32-bit, 33MHz
compatible) |
|
|
Hot-Plug PCI-ready |
|
Ultra2 SCSI (LVD) Channels |
4 channels (4 external and 2
internal connectors) |
|
Device Support |
Up to 60 devices per controller
(15 per channel) |
|
|
Up to 8 AAC-364 controllers per
server |
|
|
Supports RAID array as boot device |
|
Operating System Support |
Windows NT 4.0 and NetWare 4.11 |
|
Remote Management |
Windows 95 and Windows NT 4.0 |
Recommended minimum system requirements
- PCI-based, 2.1-compiant, 90 MHz Pentium
or equivalent motherboard
- 32 MBytes system memory
- Full-size, 3.3 or 5-volt PCI slot that
supports bus mastering
|