| COMPAQ 512MB/16 RIMM Memory
800Mhz-45 ECC 402837-872 The Rambus RIMM module is a
general purpose high-performance memory module suitable for use in a
broad range of applications including computer memory, personal
computers, workstations, and other applications where high bandwidth
and low latency are required.
The Rambus RIMM module consists of 256Mb/288Mb Direct Rambus DRAM
devices. These are extremely high-speed CMOS DRAMs organized as 16M
words by 16 or 18 bits. The use of Rambus Signaling Level (RSL)
technology permits 600 MHz, 711 MHz or 800 MHz transfer rates while
using conventional system and board design technologies. RDRAM
devices are capable of sustained data transfers at 1.25 ns per two
bytes (10ns per 16 bytes).
The RDRAM architecture enables the highest sustained bandwidth for
multiple, simultaneous, randomly addressed, memory transactions. The
separate control and data buses with independent row and column
control yield over 95% bus efficiency. The RDRAM's 32-bank
architecture supports up to four simultaneous transactions per
device.
Features :
- High speed 800, 711 and 600MHz RDRAM storage
- 184 edge connector pads with 1mm pad spacing
- Module PCB size : 133.35mm x 34.93mm x 1.27mm (5.25" x 1.375"
x 0.05")
- Each RDRAM has 32 banks, for a total of 512, 384 banks on each
512/576MB,
- 384/432MB module respectively
- Gold plated edge connector pad contacts
- Serial Presence Detect(SPD) support
- Operates from a 2.5 volt supply (±5%)
- Powerdown self refresh modes
- Separate Row and Column buses for higher efficiency
- Package Type :µBGA® packages (92 balls)
|